Blue Ripper Miter Master - Porcelain Panel Version
This product is no longer in stock
Blue Ripper Miter Master Porcelain Panel Version
This is a special light-duty version of our popular Miter Master Rail Saw designed specifically for cutting porcelain, large format tile, and other thin material (up to 1/4", 6mm). The advantage of this saw is that it is lighter (28llbs vs 52lbs) and easier to work with while still giving you a perfect miter seam. Not recommended for cutting hard stone material or thicker material.
Tips & Tricks
Blade choice is critical in determining your cut speed, edge chip, and life. We've selected what we think are pretty exceptional blades for the task, however everyone has their own preference so feel free to experiment - just make sure the blade has the side protection!
Requires Blue Ripper Rails™
These rails are designed for all Blue Ripper™ branded machines made by Omega Diamond. You can set up the Blue Ripper Rail™ on a slab and cut with either the Blue Ripper Sr™ or the Blue Ripper Jr™, then move the rail and switch out for the Blue Ripper Miter Master™ to cut the perfect mitered edge all on the same rail!
The Blue Ripper Rails™ are sold separately and DO NOT come with the Blue Ripper™ machines unless specifically ordered (see Notes below). Please see the Blue Ripper Rails™ page for rail options.
Compatible with Makita 9564CV, 9565CV, or 9566CV motors. Exact grinder model shipped may vary from machine to machine. Replace with any compatible Makita grinder.
Product may show minor usage (dust, etc.) due to factory testing when shipped.
Product may not precisely match images. We are constantly working on each of our products to find better designs, and we ship each new machine with the best design we have at that time.
You are purchasing a saw without rails - Please note that this saw requires Blue Ripper Rails™ to operate as designed. If you need rails, please see the Blue Ripper Rails™ page and call us to order.
Cuts both 45 degree angles simultaneously Light, only 28 lbs!