View larger

Send to a friend

Send to a friend

Woods Manual Tilter Series (MT)

Recipient :

Name of your friend ^* :

E-mail address of your friend ^* :

^* Required fields

or Cancel

Image	Price	Woods Lifter
-	$5,200.00	MT1010TAIR - 1500 LBS - AIR
-	$5,500.00	MT1010TAC - 1500 LBS - AC
-	$7,300.00	MT1010TDC - 3-SCFM Vacuum Package - 1500LBS - DC
-	$4,700.00	MT810TAIR - 1200 LBS - AIR
-	$5,025.00	MT810TAC - 1200 LBS - AC
-	$5,700.00	MT810TDC - 1200 LBS - DC
-	$4,500.00	MT610TAIR - 900 LBS - AIR
-	$4,775.00	MT610TAC - 900 LBS - AC
-	$5,300.00	MT610TDC - 1-SCFM Vacuum Package - 900LBS - DC
-	$4,200.00	MT410TAIR - 600 LBS - AIR
-	$4,500.00	MT410TAC - 600 LBS - AC
-	$5,199.00	MT410TDC - 1-SCFM Vacuum Package - 600LBS - DC
-	$829.00	Lift Point for Low Vertical Clearances - 58461AM (MUST BE ORDERED w/ LIFTER)
-	$845.00	Audio Alarm - 93780
-	$285.00	Adapter for Flat Lifting - 95902

Add to cart

Woods Manual Tilter Series (MT)

Reference:

Condition: New product

More info

WOODS MANUAL TILTER SERIES

STANDARD FEATURES

Individual Pad Shutoffs Enable lifter to handle various load sizes and shapes by shutting off airflow from specific vacuum pads
Replaceable Sealing Rings Adhere to textured surfaces and resist abrasion from grit and other particles
Spring-Mounted Vacuum Pads Automatically adjust to match the angle of load surfaces, easing attachment
Vacuum Gauge Features green and red zones, to clearly indicate whether vacuum level is sufficient for lifting Vacuum Line Filters Prevent contaminants from damaging the vacuum generating system
Nylon Slings Provide easy-to-use, flexible rigging made from high-quality, abrasion-resistant materials

AVAILABLE OPTIONS

Pad Shutoffs Kit with Individual Gauges Provides the same advantages as Individual Pad Shutoffs, while adding vacuum gauges to monitor the vacuum level at each vacuum pad Vacuum Loss Warning Buzzer (93780AM) Uses advanced logic circuitry to monitor vacuum level and sound an alarm only when insufficient vacuum could be hazardous
Flat Lift Adapter (95902) Allows lifter to handle flat loads by locking out the tilt function
Center Spool Lift Bar (58461AM) Enables lifter use in low-clearance situations by eliminating the need for slings or other rigging Note: Lifter weight increases by 10 lbs [5 kg]
Center Spool Lift Bar Bolt-On Adapter (95906) Adapts the standard sling-style lift bar to have the same advantages as the Center Spool Lift Bar Note: Lifter weight increases by 9 lbs [4 kg]
Vacuum Package Mounting Bar (95904) Simplifies installation of the remote power system by providing a convenient mounting location without sacrificing the lifter's low profile Note: Overall weight increases by 15 lbs [7 kg]
Alternative Pad Compounds Specially designed for heat resistance, marking resistance, coated surfaces and other purposes
Alternative Pad Frame Dimensions and Configurations Enable lifter to handle additional load sizes and shapes

AVAILABLE POWER SYSTEMS

DC Power System (MT1010TDC)
Air (Venturi) Power System (MT1010TAIR)
AC Power System (MT1010TAC) 120 volts, 50/60 hertz, 6 amps (240 volts, 50/60 hertz, 3 amps also available)

MANUAL TILTER 1500

MODEL: MT1010T These Powr-Grip® lifters are ideal for use on stone and other high-density materials with rough surfaces or irregular shapes.
Stand-Alone Vacuum Package Mounts remotely on a forklift or other hoisting equipment to maintain a narrow profile for handling stone between tightly spaced storage racks.
Pad Shutoff Valves Control airflow at specific pads, allowing operators to handle a variety of load dimensions and avoid holes in loads for the best grip.
Basic Tilt Function Allows for easy load movement from the vertical rack to the cutting table (and back again) when the pads are attached near the top edge of the load.
Models MT1010T Maximum Load Capacity 1,500 lbs [680 kg]
Standard Pad Spread 33-1/4" x 77-3/4" [85 cm x 197 cm]
Number/Size of Pads 10 / 10" [25 cm] diameter vacuum pads with replaceable sealing rings
Load Movement Manual tilt, 90° between upright and flat
Lifter Weight (without power system) 125 lbs [57 kg]

MANUAL TILTER 1200

MANUAL TILTER 1200 MODEL: MT810T These Powr-Grip® lifters are ideal for use on stone and other high-density materials with rough surfaces or irregular shapes.
Stand-Alone Vacuum Package Mounts remotely on a forklift or other hoisting equipment to maintain a narrow profile for handling stone between tightly spaced storage racks.
Pad Shutoff Valves Control airflow at specific pads, allowing operators to handle a variety of load dimensions and avoid holes in loads for the best grip.
Basic Tilt Function Allows for easy load movement from the vertical rack to the cutting table (and back again) when the pads are attached near the top edge of the load.
Models MT810T Maximum Load Capacity 1,200 lbs [545 kg]
Standard Pad Spread 21-1/4" x 77-3/4" [54 cm x 197 cm]
Number/Size of Pads 8 / 10" [25 cm] diameter vacuum pads with replaceable sealing rings Load Movement Manual tilt, 90° between upright and flat
Lifter Weight (without power system) 110 lbs [50 kg]

MANUAL TILTER 900

Manual Tilter 900 MODEL: MT6106T These Powr-Grip® lifters are ideal for use on stone and other high-density materials with rough surfaces or irregular shapes.
Stand-Alone Vacuum Package Mounts remotely on a forklift or other hoisting equipment to maintain a narrow profile for handling stone between tightly spaced storage racks.
Pad Shutoff Valves Control airflow at specific pads, allowing operators to handle a variety of load dimensions and avoid holes in loads for the best grip.
Basic Tilt Function Allows for easy load movement from the vertical rack to the cutting table (and back again) when the pads are attached near the top edge of the load.
Standard Pad Spread 11-3/4” x 77-3/4” [30 cm x 197 cm]
Number / Size of Pads 6 / 10" [25 cm] diameter vacuum pads with replaceable sealing rings
Maximum Load Capacity 900 lbs [410 kg]
Unit Weight (without power system) 100 lbs [46 kg]

MANUAL TILTER 600

Manual Tilter 600 MODEL: MT1010T These Powr-Grip® lifters are ideal for use on stone and other high-density materials with rough surfaces or irregular shapes.
Pad Shutoff Valves Control airflow at specific pads, allowing operators to handle a variety of load dimensions and avoid holes in loads for the best grip.
Basic Tilt Function Allows for easy load movement from the vertical rack to the cutting table (and back again) when the pads are attached near the top edge of the load.
Stand-Alone Vacuum Package Mounts remotely on a forklift or other hoisting equipment to maintain a narrow profile for handling stone between tightly spaced storage racks.
Standard Pad Spread 33-1/4” x 77-3/4” [85 cm x 197 cm]
Number / Size of Pads 10 / 10" [25 cm] diameter vacuum pads with replaceable sealing rings
Maximum Load Capacity 1,500 lbs [680 kg]
Unit Weight (without power system) 125 lbs [57 kg]

Send to a friend

Woods Manual Tilter Series (MT)

More info

WOODS MANUAL TILTER SERIES

STANDARD FEATURES

Individual Pad Shutoffs Enable lifter to handle various load sizes and shapes by shutting off airflow from specific vacuum pads

Replaceable Sealing Rings Adhere to textured surfaces and resist abrasion from grit and other particles

Spring-Mounted Vacuum Pads Automatically adjust to match the angle of load surfaces, easing attachment

Vacuum Gauge Features green and red zones, to clearly indicate whether vacuum level is sufficient for lifting Vacuum Line Filters Prevent contaminants from damaging the vacuum generating system

Nylon Slings Provide easy-to-use, flexible rigging made from high-quality, abrasion-resistant materials

AVAILABLE OPTIONS

Flat Lift Adapter (95902) Allows lifter to handle flat loads by locking out the tilt function

Center Spool Lift Bar (58461AM) Enables lifter use in low-clearance situations by eliminating the need for slings or other rigging Note: Lifter weight increases by 10 lbs [5 kg]

Center Spool Lift Bar Bolt-On Adapter (95906) Adapts the standard sling-style lift bar to have the same advantages as the Center Spool Lift Bar Note: Lifter weight increases by 9 lbs [4 kg]

Vacuum Package Mounting Bar (95904) Simplifies installation of the remote power system by providing a convenient mounting location without sacrificing the lifter's low profile Note: Overall weight increases by 15 lbs [7 kg]

Alternative Pad Compounds Specially designed for heat resistance, marking resistance, coated surfaces and other purposes

Alternative Pad Frame Dimensions and Configurations Enable lifter to handle additional load sizes and shapes

AVAILABLE POWER SYSTEMS

DC Power System (MT1010TDC)

Air (Venturi) Power System (MT1010TAIR)

AC Power System (MT1010TAC) 120 volts, 50/60 hertz, 6 amps (240 volts, 50/60 hertz, 3 amps also available)

MANUAL TILTER 1500

MODEL: MT1010T These Powr-Grip® lifters are ideal for use on stone and other high-density materials with rough surfaces or irregular shapes.

Stand-Alone Vacuum Package Mounts remotely on a forklift or other hoisting equipment to maintain a narrow profile for handling stone between tightly spaced storage racks.

Pad Shutoff Valves Control airflow at specific pads, allowing operators to handle a variety of load dimensions and avoid holes in loads for the best grip.

Basic Tilt Function Allows for easy load movement from the vertical rack to the cutting table (and back again) when the pads are attached near the top edge of the load.

Models MT1010T Maximum Load Capacity 1,500 lbs [680 kg]

Standard Pad Spread 33-1/4" x 77-3/4" [85 cm x 197 cm]

Number/Size of Pads 10 / 10" [25 cm] diameter vacuum pads with replaceable sealing rings

Load Movement Manual tilt, 90° between upright and flat

Lifter Weight (without power system) 125 lbs [57 kg]

MANUAL TILTER 1200

MANUAL TILTER 1200 MODEL: MT810T These Powr-Grip® lifters are ideal for use on stone and other high-density materials with rough surfaces or irregular shapes.

Stand-Alone Vacuum Package Mounts remotely on a forklift or other hoisting equipment to maintain a narrow profile for handling stone between tightly spaced storage racks.

Pad Shutoff Valves Control airflow at specific pads, allowing operators to handle a variety of load dimensions and avoid holes in loads for the best grip.

Basic Tilt Function Allows for easy load movement from the vertical rack to the cutting table (and back again) when the pads are attached near the top edge of the load.

Models MT810T Maximum Load Capacity 1,200 lbs [545 kg]

Standard Pad Spread 21-1/4" x 77-3/4" [54 cm x 197 cm]

Number/Size of Pads 8 / 10" [25 cm] diameter vacuum pads with replaceable sealing rings Load Movement Manual tilt, 90° between upright and flat

Lifter Weight (without power system) 110 lbs [50 kg]

MANUAL TILTER 900

Manual Tilter 900 MODEL: MT6106T These Powr-Grip® lifters are ideal for use on stone and other high-density materials with rough surfaces or irregular shapes.

Stand-Alone Vacuum Package Mounts remotely on a forklift or other hoisting equipment to maintain a narrow profile for handling stone between tightly spaced storage racks.

Pad Shutoff Valves Control airflow at specific pads, allowing operators to handle a variety of load dimensions and avoid holes in loads for the best grip.

Basic Tilt Function Allows for easy load movement from the vertical rack to the cutting table (and back again) when the pads are attached near the top edge of the load.

Standard Pad Spread 11-3/4” x 77-3/4” [30 cm x 197 cm]

Number / Size of Pads 6 / 10" [25 cm] diameter vacuum pads with replaceable sealing rings

Maximum Load Capacity 900 lbs [410 kg]

Unit Weight (without power system) 100 lbs [46 kg]

MANUAL TILTER 600

Manual Tilter 600 MODEL: MT1010T These Powr-Grip® lifters are ideal for use on stone and other high-density materials with rough surfaces or irregular shapes.

Pad Shutoff Valves Control airflow at specific pads, allowing operators to handle a variety of load dimensions and avoid holes in loads for the best grip.

Basic Tilt Function Allows for easy load movement from the vertical rack to the cutting table (and back again) when the pads are attached near the top edge of the load.

Stand-Alone Vacuum Package Mounts remotely on a forklift or other hoisting equipment to maintain a narrow profile for handling stone between tightly spaced storage racks.

Standard Pad Spread 33-1/4” x 77-3/4” [85 cm x 197 cm]

Number / Size of Pads 10 / 10" [25 cm] diameter vacuum pads with replaceable sealing rings

Maximum Load Capacity 1,500 lbs [680 kg]

Unit Weight (without power system) 125 lbs [57 kg]

CLICK HERE FOR ALL PRODUCT FLYERS / INSTUCTIONS AND TROUBLE SHOOTING INFORMATION