This powerful, light-weight, portable rail saw makes cutting granite countertops a breeze!
Do you need speed, accuracy and quality work at your job site? The Blue Ripper Jr.™ Rail Saw delivers that and much more. Whether in the shop or out on the job site, the Blue Ripper Jr. Rail Saw nails precision work with ease. The Blue Ripper Jr.™ Rail Saw makes full plunge cuts up to 4 cm in depth. By using the rail system there is no need to use gauges, shims, or offset measurements. Your rail is your guide. With this rail system you will have accuracy and smoothness absolutely better, and faster, than by hand.
Tips & Tricks
A tip we discovered to help prevent wear damage to the front hinge bracket of the Blue Ripper Jr is to coat the inside of the motor housing near the front hinge, as well as the hinge bracket where the blade sprays onto it, with Silicone. As the Silicon wears simply re-coat the surfaces. A lot cheaper and easier than having to buy a new bracket and re-aligning the saw every few years! See the attached manual for operating instructions, replacement parts, and more!
For a short period we offered the Blue Ripper Jr rail saw with your choice of either a Makita5477NB, Milwaukee 6477-20, SkilsawSHD77M, or a Bosch 1677M. This proved to be a bad choice - the majority of our customers that purchased the non-Makita brands wound up swapping them out for the Makita. This is because the bronze worm drive does not hold up to the vibration generated by cutting stone - we observed that the gear oil in these motors would go black within an hour's worth of cutting, and would often fail within a few days worth of operation. Makita is still the only brand that offers the infinitely superior hypoid bevel gear - which we have not yet seen be the point of first failure in even the most abused Makita. Because of this we've discontinued advertising and web sales of the models of the Blue Ripper Jr that used the other brands.
Takes full plunge cuts past 4cm deep!
Up to 4 FPM cut speed, single pass through 2cm absolute black!
4,300 motor RPM
Accepts up to 8" blades
Standard 5/8" blade Arbor
One-hand water disconnect
Easy-adjust locking height adjustment
Only 19.8 pounds in weight!
Manufactured with PRIDE in the USA!
Makita 5477NB hypoid saw, or Milwaukee 6477-20 worm-drive saw, or Skil SHD77M worm-drive saw, or Bosch 1677M worm-drive saw.