The Supplies you need for stone, tile, marble, concrete and more
Toll Free
866-227-8665
We accept
Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Alpha Hot-Rod
New product
More info
Alpha Hot-Rod Blades
-
Cutting Channels for Support Rods
-
Alpha® developed a revolutionary way to improve the efficiency of fabricators. For years, slab fabricators have employed labor-intensive procedures for creating channels in the underside of countertops to accommodate stainless steel reinforcing rods at sink and cooktop cutouts.
-
Alpha® recognized the opportunity for improvement and developed the Alpha® Hot-Rod. With this blade attached to the Alpha® AWS-110 or AWS-125 Wet Stone Cutter, a fabricator can accomplish the task in one easy pass.
-
The Hot-Rod for Granite blades were created with diamond grits and matrix best suited for all categories of granite, including hard red granites, to assure a long cutting life. With a 3” diameter, the blade allows for easy use and better leverage when cutting 1/4” deep channels, by allowing for better positioning of the stone cutter’s handle.
-
This blade is now available in three thicknesses: 1/4” for standard rods, 1/8” for thinner rods and 3/8” for threaded rods.
-
The Hot-Rod for Marble applies the same technology but is designed for softer stones such as marble. This blade is available in 1/4” for standard and 1/8” for thinner rods.
-
For efficient creation of channels for reinforcing rods, attach this unique blade to our AWS-110 or AWS-125 for a smooth, dust-free operation. Used in this manner, productivity will increase significantly.
-
Although Alpha® recommends wet cutting, these blades may be used wet or dry.
| HT03A+ | 3" | 4.2mm | 14,500 | 7/8", 20mm | 1/8" Rod | Granite | 94.96 |
| HQ03A+ | 3" | 5.5mm | 14,500 | 7/8", 20mm | 3/16" Rod | Granite | 94.96 |
| HR03A+ | 3" | 7.0mm | 14,500 | 7/8", 20mm | 1/4" Rod | Granite | 94.96 |
| HW03A+ | 3" | 11.5mm | 14,500 | 7/8" | 3/8" Threaded Rod | Granite | 108.30 |
| HS03A+ | 3" | 4.6mm | 14,500 | 7/8", 20mm | 1/8" Rod | Marble | 94.96 |
| HM03A+ | 3" | 6.5mm | 14,500 | 7/8", 20mm | 1/4" Rod | Marble | 94.96 |
| HP03A+ | 3" | 6.0mm | 14,500 | 7/8", 20mm | 1/4" Rod | Porcelain | 96.25 |
| HA03A+ | 3" | 7.0mm | 14,500 | 7/8", 20mm | 5/16" Rod | Porcelain | 96.25 |
| HT04A+ | 4" | 4.2mm | 14,500 | 7/8", 20mm | 1/8" Rod | Granite | 100.90 |
| HR04A+ | 4" | 7.0mm | 14,500 | 7/8", 20mm | 1/4" Rod | Granite | 100.90 |